My USBASP came with A 10 to 10 connector instead of a 10 to 6 for my KK2.
Can any one help me with a detailed picture or a description on how to arrange the wires, so I can flash the board.
The way I have it on the board now is: 2nd wire to connector 6, 4 to 4, 6 to 2, 7 to 1, 9 to 5 and 10 to 3.
As far as I can see from this picture I got it right but the board is not lighting up and error in the program.
Any help would be greatly appreciated.
Gr.
Can any one help me with a detailed picture or a description on how to arrange the wires, so I can flash the board.
The way I have it on the board now is: 2nd wire to connector 6, 4 to 4, 6 to 2, 7 to 1, 9 to 5 and 10 to 3.
As far as I can see from this picture I got it right but the board is not lighting up and error in the program.
Any help would be greatly appreciated.
Gr.