Solved Vtx wont turn on

Tom26

New member
I wired up my new fpv gear for the first time and when i plug the battery in it dose nothing and the lights on the vtx are not running.
Im running
A runcam swift cammera
A succex force vtx
A TrueRc blaze led antennas
 

Bifi.baarlo

Well-known member
I wired up my new fpv gear for the first time and when i plug the battery in it dose nothing and the lights on the vtx are not running.
Im running
A runcam swift cammera
A succex force vtx
A TrueRc blaze led antennas
It only needs ground and power 7-34 Volt, if that is right, than it is broken, maybe you powered it up without antenna?
 

PsyBorg

Wake up! Time to fly!
Did you do a complete setup including adding the vtx tables? It it set to only power on when armed? Is it set to pit mode?

this video gives a basic set up run thru that may help you.

 

Tom26

New member
Would powering it up with the antenna in but without wiring up the antennas led break iti
Did you do a complete setup including adding the vtx tables? It it set to only power on when armed? Is it set to pit mode?

this video gives a basic set up run thru that may help you.

It is for a plane so i am only using the vidio + and two - pins
 

Bifi.baarlo

Well-known member
Would powering it up with the antenna in but without wiring up the antennas led break iti

It is for a plane so i am only using the vidio + and two - pins
Like I said, it needs power and ground to turn on, that's why it isn't doing anything.
 

Tom26

New member
The vtx had power and ground but i was meaning the led in the antenna but i think it is separate.