Rzar
Junior Member
Hello I have a Walkera Runner 250 that is losing power mid-flight.
I have my throttle trim set so my motors constantly spin, and have a throttle hold programmed to prevent the Walkera flip o death. The interval seems random, but I will be flying and all of a sudden all 4 motors will lose power, then about 2 seconds later come back. Unfortunately this is usually enough time for the quad to drop like a brick. The lights don’t flicker when this happens. I have checked all the wires that I can. The Walkera power distribution board is one big circuit board where all parts are plug and play into that board. No solder points. My next steps will be to reseat all components on the board. I also have a new power distribution board on order. But is there anything else I should check?
I have my throttle trim set so my motors constantly spin, and have a throttle hold programmed to prevent the Walkera flip o death. The interval seems random, but I will be flying and all of a sudden all 4 motors will lose power, then about 2 seconds later come back. Unfortunately this is usually enough time for the quad to drop like a brick. The lights don’t flicker when this happens. I have checked all the wires that I can. The Walkera power distribution board is one big circuit board where all parts are plug and play into that board. No solder points. My next steps will be to reseat all components on the board. I also have a new power distribution board on order. But is there anything else I should check?