swirlypillow
New member
well, here's what i ended up with.
not even remotely a Gremlin, heh.
i ended up with this:
Airblade Eclair v2 2.5 inch frame
Mini Magnum v2 stack
EMAX 1106 II 6000kv motors
Gemfan Flash 2540 props
Runcam Micro Eagle
Spektrum RC DSMX Quad Reciever w/ Diversity
I originally bought the Chad Lewis frame, and the stack was way too huge to fit. Figured it'll fit the Sidewinder frame, so I got that, and it still didn't fit. You can see my newbness at work here. Got the Airblade Eclair frame, which worked...everything is crammed in there though. Still, I have a sweet drone to fly.
In the last two pics, i relocated the receiver from behind the camera to above the vtx. it just barely fits there and isn't as well protected, but now I can tilt the camera more.
not even remotely a Gremlin, heh.
i ended up with this:
Airblade Eclair v2 2.5 inch frame
Mini Magnum v2 stack
EMAX 1106 II 6000kv motors
Gemfan Flash 2540 props
Runcam Micro Eagle
Spektrum RC DSMX Quad Reciever w/ Diversity
I originally bought the Chad Lewis frame, and the stack was way too huge to fit. Figured it'll fit the Sidewinder frame, so I got that, and it still didn't fit. You can see my newbness at work here. Got the Airblade Eclair frame, which worked...everything is crammed in there though. Still, I have a sweet drone to fly.
In the last two pics, i relocated the receiver from behind the camera to above the vtx. it just barely fits there and isn't as well protected, but now I can tilt the camera more.
Last edited:
