Tronglodon
Junior Member
I need to replace the 5 wire harness on this betafpv a01 video transmitter. I think this is a jst sh connector. Can anyone with experience confirm?
What connector is this?
- Thread starter Tronglodon
- Start date
I need to replace the 5 wire harness on this betafpv a01 video transmitter. I think this is a jst sh connector. Can anyone with experience confirm?
Looks like an SH to me, if you have a caliper or something to measure accurately you can check against the drawing here: https://www.digikey.com/catalog/en/partgroup/sh-series/8406
Tronglodon
Junior Member
Cool, looks like the measurements line up. I'm sure enough to buy a pack of connectors and crimped wires from RMRC for $5. Worst thing that could happen is I'm out five bucks but have some extra connectors I'll almost certainly use down the road.
Never hurts to have spare junk 
Bricks
Master member
Never hurts to have spare junk
Isn`t that the honest to gods truth, but still never have what you need.
