What connectors does this ESC use?

FDS

Elite member
You can always change them if you get different ones, or the motor wires can be soldered direct to the ESC ones. Just be sure to get good joints and insulate fully, with heat shrink.
 

w1lp33

Active member
Picture I meant to add as well:
 

Attachments

  • 251D5F67-89E3-4959-952E-BF88CF53653B.jpeg
    251D5F67-89E3-4959-952E-BF88CF53653B.jpeg
    31.7 KB · Views: 0

CarolineTyler

Legendary member
Thanks, appreciate the help, but I think I'm just gonna stay with the bullets. I only asked to know what connector to solder onto my motor.
Watch out for the bullet sizes - I have had every size from 2mm up to 5mm - only recently I ordered some 3mm bullets connectors only to find out they were 3.5mm on the motor! I've had a good look at the listing and can't see anywhere it lists the diameter.
 

FDS

Elite member
The only problem with those nice connectors is they are 30A max. I am going to get some next HK order anyway, they will be handy for mini size builds like the TT where I am always taking out or breaking the power pod.
DB8DC096-D0F5-4F91-ADA8-6311075F5370.jpeg
 

w1lp33

Active member
Well all the regular sized planes use 30 or 35 amp esc anyway, and I can say they work fine with those.

But there is a 60 amp version as well, that’s beefier and shaped like a triangle.



The only problem with those nice connectors is they are 30A max. I am going to get some next HK order anyway, they will be handy for mini size builds like the TT where I am always taking out or breaking the power pod.
View attachment 141593
 

Attachments

  • 2694569B-AC52-4B69-8982-6B6278F18E6C.jpeg
    2694569B-AC52-4B69-8982-6B6278F18E6C.jpeg
    41.8 KB · Views: 0