What else do I need?

[Jaxx]

Hey guys, I thought I would post here regarding the purchase of all my electronics for an airplane I have built.


Here is my list:
Servo: http://hobbyking.com/hobbyking/store/__22927__HXT900_9g_1_6kg_12sec_Micro_Servo_USA_Warehouse_.html
Motor:http://hobbyking.com/hobbyking/store/__24239__D2826_6_2200kv_Outrunner_Motor_USA_Warehouse_.html

Speed Controller: http://hobbyking.com/hobbyking/store/__24235__TURNIGY_TRUST_45A_SBEC_Brushless_Speed_Controller_USA_Warehouse_.html

Charger:http://hobbyking.com/hobbyking/store/__39436__iMAX_C_403_Super_Simple_Balance_Charger_Genuine_USA_warehouse_.html

Battery:http://hobbyking.com/hobbyking/store/__15019__Turnigy_2200mAh_3S_20C_Lipo_Pack_USA_Warehouse_.html

Servo extensions: http://hobbyking.com/hobbyking/store/__43756__Twisted_30CM_Servo_Lead_Extention_Futaba_22AWG_5pcs_set_USA_warehouse_.html

I already have a RC RX and TX. soo.. did I do ok? is 20c good enough for all of the servos and engine esc ect.? AM I MISSING ANYTHING???? thanks yall for your help!

I may have missed it, but what kind of plane are you purchasing this equipment for?

 

[KLJ4CCH]

I am building an EA Axon. I forgot to mention that didnt I? hahah

 

[KLJ4CCH]

I just got a hold of 3 hitech 82mg servos. ailerons, and elevator will be getting these. Ill get a cheap servo for the rudder as if it failed it is not as important as all the others.

I got them for the best price....FREE

 

[xuzme720]

Free is always good...