What lemon rx should I buy for the Gremlin?

[kdobson83]

I have a dx8e and I would like to use the cheaper lemon brand rx's as they are cheap, work great, and I already have most of my planes equipped with them. My question is which one should I buy to put in my gremlin? I've done some research and see people using a satellite rx in their quads. Would this work?

Lemon RX DSMX Compatible Full-Range 6-Channel Receiver + Satellite LM0028 DSM2 https://www.amazon.com/dp/B01MQHAY43/?tag=lstir-20

Would I bind the satellite to the quad and then be able to use the main rx in my other plane? If not, anyone have recommendations?

 

[LitterBug]

Use the LMN0008 satellite RX. Works like a charm. I use them in all my micro builds. http://www.buddyrc.com/lemon-rx-dsmx-compatible-satellite-receiver.html

Cheers!
LitterBug

 

[kdobson83]

So what you linked looks exactly like the satellite that comes with the receiver I linked. Can I buy what I linked, use the satellite in my gremlin then use the other receiver for another plane?

 

[LitterBug]

You should be able to do that just fine.

Cheers!
LitterBug

 

[Michael9865]

I use the Lemon Satellite in my Gremlin and it works well.

 

[kdobson83]

You should be able to do that just fine.

Cheers!
LitterBug

So, I have my lemon rx satellite now. It's not the same connector that I had with my flysky rx. Both have 3 wire plugs. How would I go about witching them? I'm not the best solderer. I've attached picture of the plug that came with the lemon rx and the plug that's on my gremlem. After I've bound the rx to my tx, which wires need to be where? I had the gremlen all set up and flying on my flysky tx, do I need to hook up to my computer and change things? If so, what program should I use? Any help is appreciated. Sorry to be such a newb. Lol I do planes, not quads. Lol