Turbojoe
Elite member
Can I join in on the Willy Nillies club? Mine is complete enough for test flight. If successful then I'll "clean up" some of the temporary things like the UMX gear mounting with latex caulk that I just kind of smeared on. Installing this UMX gear required so many test fits to keep the angle on the pushrods so they wouldn't bind. I HATE those linear servos!!! I probably made and remade servo mounting 5-6 times in both the fuselage and the wing. Next build will have normal gear in it for sure.
This isn't a build thread. I thought I'd post shots of some of the mods I made during the build. In the finished shot here you can see the aileron servos mounted on the top so in case I did some belly landing I wouldn't destroy the servos when landing. After I know it flys well I'll made some covers.
Look again at the fuse and you'll see I added a "cowl" for the motor.
Joe
This isn't a build thread. I thought I'd post shots of some of the mods I made during the build. In the finished shot here you can see the aileron servos mounted on the top so in case I did some belly landing I wouldn't destroy the servos when landing. After I know it flys well I'll made some covers.
Look again at the fuse and you'll see I added a "cowl" for the motor.
Joe