Wonderen

ErwinB

Junior Member
Ben deze zomer terug in de hobby gerold na een 10 jaar lange afwezigheid, mede dank zij door FT.
Mijn zoon van 13 is nu ook aan het leren vliegen en samen maken we er een gezellige hobby van.
Ondertussen 2 Wonders gebouwd, ééntje met 3mm "pluimkarton" en ééntje van 5mm.
Heb het materiaal (schuim met aan twee kanten bedekt papier) gevonden bij Transfert in Kontich.
Vliegen beide zeer goed en er is nog geen papier afgewaaid :D

Ben ondertussen ook geïnteresseerd geraakt in de multicopters en vlieg momenteel ook met de H-quad en een Tricopter, beide gebouwd zoals beschreven op FT. Beetje ter plaatse hangen gaat al, maar rondvliegen lijkt me toch een hele uitdaging.
FPV gear ligt ook al klaar op de kast...

Je kan ons regelmatig vinden bij de vliegclub "De Condors" in Brecht

Groeten,
Erwin IMG_1005.JPG IMG_1130.JPG
 

PHugger

Church Meal Expert
For those who don't speak Dutch.....
(courtesy of Google Translate)

Are back this summer in the hobby rolled after a 10 -year absence , thanks to FT .
My son of 13 is now learning to fly and together we will make a nice hobby of it.
Meanwhile, two built Wonders , one with 3mm " plume cardboard " ntje 5mm .
Did the material ( foam on two sides coated paper) found in Transfert Kontich .
Fly both very good and there is no paper blown

Are meanwhile also become interested in the multicopters and currently also fly with the H- quad and Tricopter , both constructed as described on FT. Little hang spot is all but flying than me seem daunting .
FPV gear is already waiting in the closet ...

You can find us regularly at the flying club " Condors " in Brecht

regards,
 

ErwinB

Junior Member
Try to post in English from now on...

Thanks to FT, I came back in the hobby in august this year after a 10 year absence.
My son of 13 is now learning to fly and together we will make a nice hobby of it.
Meanwhile, built two Wonders , one with 3mm "cardboard " and one in 5mm.
Did find the material ( foam with two sides coated paper) in Transfert Kontich .
Fly both very good and they are still in one piece.

Meanwhile also became interested in the multicopters and currently also fly with the H-quad and Tricopter , both constructed as described on FT. Hovering is ok but flying around is a real challenge.
FPV gear is already waiting to be instaled

You can find us regularly at the flying club " Condors " in Brecht

regards
Erwin

Try to post in English from now on...
 

marc60

New member
Hey Erwin, buurman zie ik (Hi Erwin, neighbour I see lol)
If your gonna fly FPV, take a look at the dutch FPV forum. There's a lot of tips, tricks and knowledge there! En het is gewoon leuk en gezellig.

Groeten Marc
 

Ludodg

Member
Hallo mensen,

Ludo vanuit Sint-Genesius-Rode hier, nét onder Brussel ... en dus een flink eind van Brecht :)

Ben zelf heel recent gestart van noppes-nul-vliegervaring ... al een paar foamies gebouwd en gecrashed. Ik slaag er al beter in die in de lucht te houden. Ook de zoontjes, 8 en 12, helpen graag mee. De oudste vloog al met een Flyer (swappable). Ikzelf met de Flyer en een Maker Trainer 1 en 2.
 

Ludodg

Member
Hey Erwin, buurman zie ik (Hi Erwin, neighbour I see lol)
If your gonna fly FPV, take a look at the dutch FPV forum. There's a lot of tips, tricks and knowledge there! En het is gewoon leuk en gezellig.

Groeten Marc
Hallo MArc.
Over welk forum heb je het? Een onderdeel van modelbouwforum, misschien?