Z axis Servo Help - Laser Cutter Addon

Bfromaz

New member
Built this universal laser cutter for my wife over covid for crafting cut outs. I now want to add a needle foam board cutter to it for myself. I will be using a servo for the z axis movement and will 3d print my own design for it. Issue I have is there is no documentation for the board I can find. Company has next to no support. I use T2Laser and it has z support. There are servo pins on the board. Im a geek but not a cnc geek lol. Any help appreciated on how to go about this. Just looking for how to actuate the servo between cuts.

Thanks
Bfromaz
 

Attachments

  • Cut1.jpg
    Cut1.jpg
    1.6 MB · Views: 0
  • Cut2.jpg
    Cut2.jpg
    2 MB · Views: 0
  • Cut3.jpg
    Cut3.jpg
    494.2 KB · Views: 0

Bfromaz

New member
Answering my own question... Easiest solution is to just get an ERC TIMSAV board and swap motor connectors between boards. That way I don't screw up the wifes toy lol. this way I can play all I want and no dog house issues. Still open for suggestions if you see a better way... Thanks.
 

Merv

Site Moderator
Staff member
...Still open for suggestions if you see a better way...
If you are getting a separate board, just as well go all the way. A couple of steppers and rails and you have your own machine. No more swapping.