Carboard PC-6 Scratchbuild.

[Bo123]

I got a bit bored, I had no materials, but had a billion boxes from moving houses, so I had decided to make a plane. I made a pilatus PC-6 sort of thing. I used a bushwhacker wing, and some left over landing gear that I had. I think when I get some foamboard, I should make another of these.

As you can see, the first takeoff didn't go well. I might try and make a new wing, the is slightly bigger.

 

[Baron VonHelton]

"If it turns to the left you forgot to set your motor to COUNTER CLOCKWISE or forgot to add a counter clockwise propeller" - Josh Bixler
SOURCE: Fokker Dr1 video, SE5 video

 

[Bo123]

I think it was the wind. When I set it going in the opposite direction down the runway, it went the opposite way. Both runs turned south east, and the wind was from the west. I am adding a bigger motor, and a free-spinning tailewheel, to help me turn.

"If it turns to the left you forgot to set your motor to COUNTER CLOCKWISE or forgot to add a counter clockwise propeller" - Josh Bixler
SOURCE: Fokker Dr1 video, SE5 video

Thanks for the advice though.