Very interesting. Downloaded the DRonin and went through it briefly .Yes we have a research team particularly targeting the CC3D Revolution. Under the free GNU license, we acquired the GERBER, BOM and schematics of the CC3D Revolution with OPlink telemetry on board.
Our goal is to re-launch this amazing piece of flight controlling hardware with the following modifications:
1. Increased memory (at least to 4Mb)
2. Onboard I2C breakout
3. Python or C++ program loader. Alternately we would like to integrate the CC3D Revolution with an arduino such as Uno etc. This integration could be in the form of serial commands to the arduino. The serial commands could be sent from an editbox programmed in dRonin.
I will certainly include you into the Research Team and update you.
Our team went through dRonin.
1. It has an unfixed bug which "disconnects" randomly. On the FC this could be catastrophic
2. It does have some extra features such as camera etc.
3. No script loading facility.
4. The mode parameters in the path planner seems incomplete. Although SetAccessory is available in dropdown menu, but no option to select the accessory (eg: channel 6 etc)
5. Quiting from dRonin sometimes freezes.
I would think that librePilot seems quite stable and easy. Unfortunately the LibrePilot forum died.
We on the other hand are strictly hardware engineers specializing in the setup/modifying hardware especially for the CC3D Revolution upgrade and would really like to promote the Autonomous Flight modes and setup of this flight controller using LiberPilot.
Perhaps we should launch a dedicated forum for LibrePilot/ CC3D Revolution.? Or request the management of this forum to allow for a dedicated Thread?
What is your comment.