Throttle on wrong stick

[Ar19adam]

Hey guys,

I am new to RC and I am putting together a pnp. I bound my reciever and transmitter. But everytime i turn plug in the plane the he throttle is on the self centering right stick. I have a flysky fs-i6 and fs-ia6b

 

[Foamforce]

Hey guys,

I am new to RC and I am putting together a pnp. I bound my reciever and transmitter. But everytime i turn plug in the plane the he throttle is on the self centering right stick. I have a flysky fs-i6 and fs-ia6b

The ESC should plug into channel 3 for FlySky. Ailerons are on channel 1, elevator on 2, rudder on 4.

 

[luvmy40]

You have the ESC control wire plugged into the wrong channel on the receiver. Either that or you somehow reconfigured the transmitter to operate in Mode 1.

 

[Merv]

...I have a flysky fs-i6 and fsfs-ia6b

On some Rx's the first set of pins is for the battery, not channel 1. Channel 1 is the next set of pins over.

 

[Ar19adam]

The ESC should plug into channel 3 for FlySky. Ailerons are on channel 1, elevator on 2, rudder on 4.

That was it! Thank you

 

[squishevolve]

On some Rx's the first set of pins is for the battery, not channel 1. Channel 1 is the next set of pins over. penalty kick online

Oh, It's useful for me.