Killerbean
New member
i cannot find where to get build plans for the new symbol mapping designs. I hope that i am just mistaken as to where to look because it would greatly dissapoint me to see that the flitetest experience has become pay to play.
There is a whole section of the forums devoted to plans.i cannot find where to get build plans....
thanks for the information, and sorry for being so cluelessThere are many, many, posts, podcasts, articles, and videos explaining that the Master Series builds are only going to be available in kit form. The TL;DR; version is that too many people were copying the plans, duplicating the laser-cut kits, and selling them in competition to FT in clear violation of the terms of use. The Master Series builds are John Overstreet designs made and sold by Flite Test. The OG plans are Josh Bixler's designs. After the cutoff date, Bixler plans are available to FTCA members at a very low cost. No more plans will be released for free. There are plenty (50+?) free plans available on this forum to build and fly, not to mention hundreds more on RCGroups.
If you are a member where do you purchase the plans?There are many, many, posts, podcasts, articles, and videos explaining that the Master Series builds are only going to be available in kit form. The TL;DR; version is that too many people were copying the plans, duplicating the laser-cut kits, and selling them in competition to FT in clear violation of the terms of use. The Master Series builds are John Overstreet designs made and sold by Flite Test. The OG plans are Josh Bixler's designs. After the cutoff date, Bixler plans are available to FTCA members at a very low cost. No more plans will be released for free. There are plenty (50+?) free plans available on this forum to build and fly, not to mention hundreds more on RCGroups.
FTCA PortalIf you are a member where do you purchase the plans?
It's understandable to feel disappointed about the shift in availability of Flight Test's designs. Their accessibility and affordability were major draws for many hobbyists, offering a gateway into RC aviation without breaking the bank. The ability to craft an airframe from simple materials like foam board was part of what made Flight Test so appealing.I'm definitely a little disappointed that the new designs aren't published anymore (either for free or paid) and only are available as kits. One of the best things about FT imo was always that it was so accessible for people with a low budget; you could buy $15 of foam from a store and, with just a pen knife, a little bit of hot glue, and some labor, have a perfectly functional airframe. While electronics are always relatively expensive (say around $50 dedicated to a typical model), foam and plans have always been pretty cheap, and equally inexpensive to rebuild/repair if crashed. For kit exclusives the airframe cost is almost double or triple: what would have been $15 of foam is now $15 of shipping plus around $50 for the kit. Obviously, there's a lot of convenience in the pre-cut foamboard, and I do think it's nice that's available for people who don't necessarily have the time, patience, or even space to cut out the parts themselves.
I can also understand the desire to reduce commercial design theft. I guess it just feels like this policy poses a bigger obstruction for the individual who can't justify $65 for an airframe than it poses for someone who has the resources to copy, mass-produce, market, and sell clones. If you can afford to mass-produce and sell a model kit, you probably can manage a couple hundred $$ up front to purchase to get 100 dollars instantly and scan the original IP.
I know there are a lot of alternative designs out there, as well as the many designs already released by FT that are totally free. I'm definitely grateful to have those available (and I'll hopefully be building one soon; first build since mid-2018!) I also can understand the idea that if you're in this hobby on a shoestring budget you aren't going to be able to have everything that's the latest and greatest; that is a compromise I'm definitely familiar with.
I think my disappointment is mostly because for so long FT really championed scratchbuilding as a way to lower the barrier to entry with RC, releasing models that you could build yourself at a fraction of the cost of commercial offerings. And the key was that these scratchbuilds didn't even seem to compromise on the final product: they're great flying and great looking planes. Now there's an artificial barrier: if you want to build these designs you need to buy our kit and our materials. No more new FT scratchbuilds.
All that being said, I definitely appreciate FT and the excellent models they've developed and published in various forms over the years. Maybe someday if I'm really feeling extravagant I'll bite the bullet and buy a $65 airframe; until then I'll just have to explore some of the other great community designs out there
Yes. Tiny Trainer is a great example. Having built many different planes from plans and kits, this is still a goto plane for our family. Our problem from FT and the forum is "too many plans, so little time!" That being said, when are the RV plans going to be released? LOLAt the risk of sounding cruel, if you can't afford what you want, lower your wants. A Tiny Trainer, for example, may not be a (3D, Rocket, War Bird) your pick, but is a complete airframe allowing years of pleasure if you treat it well. It sounds like you have some experience with scratch building so presumably you have some electronics laying around. You can be at the field with a completely air worthy model at nominal cost while you save your funds for something more exotic. Good luck and I hope you find what you are after.