Just had to do the plans and model of this aircraft. Technical data will come soon...
unrauv Active member Apr 23, 2018 #1 Just had to do the plans and model of this aircraft. Technical data will come soon...
DamoRC Elite member Mentor Apr 23, 2018 #2 Sounds like one you need to get out of your system? Like the start you have made and looking forward to seeing how you handle her curves. DamoRC
Sounds like one you need to get out of your system? Like the start you have made and looking forward to seeing how you handle her curves. DamoRC
Jetcrafter_2000 Member Apr 24, 2018 #3 Great Plane! Are you going to put retracts on it? Jetcrafter2000
unrauv Active member Apr 24, 2018 #4 More modeling... I will be fixing the vertical tail size. They are too big. Last edited: Apr 24, 2018
Grifflyer WWII fanatic Apr 24, 2018 #5 I've always loved the three vertical stabilizers on this plane.
unrauv Active member Apr 24, 2018 #6 The reason they used three was so it would fit in the existing hangers.
AkimboGlueGuns Biplane Guy Mentor Apr 24, 2018 #7 Uh-oh, this look like a Flite Fest build for me! I LOVE the Connies.
unrauv Active member Apr 24, 2018 #8 When is Fight Fest this year? I have yet to figure out which landing gear will work. Suggestions?
AkimboGlueGuns Biplane Guy Mentor Apr 24, 2018 #9 Flite Fest East will be mid July this year. I think with some foam hacking you could get the original tricycle gear to work.
Flite Fest East will be mid July this year. I think with some foam hacking you could get the original tricycle gear to work.
unrauv Active member Apr 24, 2018 #10 I fixed the scale issue on the tail, its now about 10% larger that scale.
AkimboGlueGuns Biplane Guy Mentor Apr 24, 2018 #11 What size motor will this run off of? I would really like to get one of these built this summer.
unrauv Active member Apr 24, 2018 #12 4 x Propdrive 2826 1200Kv https://hobbyking.com/en_us/propdri...nner-motor-short-shaft-version.html?mode=list 4 x 30 Amp ESC's Simonk 30A/40A 2-4S Brushless ESC Speed Control for RC FPV Racing Drone - 30 https://www.banggood.com/Simonk-30A...6.html?rmmds=search&ID=47280&cur_warehouse=CN or 4X XXD HW30A 30A Brushless Motor ESC For Airplane Quadcopter (cheap but good reviews) https://www.banggood.com/4X-XXD-HW3...r-p-961966.html?rmmds=search&cur_warehouse=CN 2 x 8 x 6 CW Propellers 2 x 8 x 6 CCW Propellers I will design using these Landing Gear : 2 x Digital Servoless Retractable system (1pc) 54g Main Gear https://hobbyking.com/en_us/digital-servoless-retractable-system-1pc-54g.html?mode=list Servoless Steerable Nose Retract with Metal Trunion 44mm x 41mm Mount https://hobbyking.com/en_us/servole...etal-trunion-44mm-x-41mm-mount.html?mode=list Last edited: Apr 24, 2018
4 x Propdrive 2826 1200Kv https://hobbyking.com/en_us/propdri...nner-motor-short-shaft-version.html?mode=list 4 x 30 Amp ESC's Simonk 30A/40A 2-4S Brushless ESC Speed Control for RC FPV Racing Drone - 30 https://www.banggood.com/Simonk-30A...6.html?rmmds=search&ID=47280&cur_warehouse=CN or 4X XXD HW30A 30A Brushless Motor ESC For Airplane Quadcopter (cheap but good reviews) https://www.banggood.com/4X-XXD-HW3...r-p-961966.html?rmmds=search&cur_warehouse=CN 2 x 8 x 6 CW Propellers 2 x 8 x 6 CCW Propellers I will design using these Landing Gear : 2 x Digital Servoless Retractable system (1pc) 54g Main Gear https://hobbyking.com/en_us/digital-servoless-retractable-system-1pc-54g.html?mode=list Servoless Steerable Nose Retract with Metal Trunion 44mm x 41mm Mount https://hobbyking.com/en_us/servole...etal-trunion-44mm-x-41mm-mount.html?mode=list
unrauv Active member Apr 24, 2018 #13 I guess the pressure is on to get here done. Plans should be done for end of May. I sent you a message AkimboGlueGuns. Last edited: Apr 24, 2018
I guess the pressure is on to get here done. Plans should be done for end of May. I sent you a message AkimboGlueGuns.
unrauv Active member Apr 27, 2018 #15 Starting fuselage conformation of part sizing and placement... Front Top Left. Front Top Right. Front Bottom Right. Back Right View.
Starting fuselage conformation of part sizing and placement... Front Top Left. Front Top Right. Front Bottom Right. Back Right View.
AkimboGlueGuns Biplane Guy Mentor Apr 27, 2018 #16 Looks like a solid superstructure. Once the skin is on it should be a tough bird.
unrauv Active member Apr 27, 2018 #19 Just to get you excited about this aircraft.... This one is in German. Last edited: Apr 27, 2018
AkimboGlueGuns Biplane Guy Mentor Apr 27, 2018 #20 Oh believe me, I'm already excited! Airliners are pretty underrepresented in the RC community and this is my 2nd favorite!
Oh believe me, I'm already excited! Airliners are pretty underrepresented in the RC community and this is my 2nd favorite!