I'm new to the RC hobby and i wanna build a simple RC plane to start off and i can't spend more than 120€. I searched through hobby king and found almost everything except a ESC with BEC and LVC and a battery. I didn't wanna buy something that doesn't work so i'm asking you guys for suggestions sorry if its in the wrong section.
Here is my battery (it has a low output C because i heard in another post that 10C is "the best" because you can fly longer)
https://hobbyking.com/en_us/multistar-high-capacity-3s-3000mah-multi-rotor-lipo-pack.html
and here is my ESC. (It has BEC not sure if it has a LVC because it doesn't say anywhere)
https://hobbyking.com/en_us/turnigy-plush-10amp-9gram-speed-controller.html
So my question is is the ESC gonna get burned out if yes then what is a better alternative
and this is my motor just in case someon needs it for something
https://hobbyking.com/en_us/hextronik-24gram-brushless-outrunner-1300kv.html
this is a screenshot of my cart in hobbyking https://gyazo.com/214b6c2089f6f47b2b7297f2b998793b
EDIT: And i need a good connector i heard XT60's are good or is there anything better i can buy. I'm fine with soldering
Here is my battery (it has a low output C because i heard in another post that 10C is "the best" because you can fly longer)
https://hobbyking.com/en_us/multistar-high-capacity-3s-3000mah-multi-rotor-lipo-pack.html
and here is my ESC. (It has BEC not sure if it has a LVC because it doesn't say anywhere)
https://hobbyking.com/en_us/turnigy-plush-10amp-9gram-speed-controller.html
So my question is is the ESC gonna get burned out if yes then what is a better alternative
and this is my motor just in case someon needs it for something
https://hobbyking.com/en_us/hextronik-24gram-brushless-outrunner-1300kv.html
this is a screenshot of my cart in hobbyking https://gyazo.com/214b6c2089f6f47b2b7297f2b998793b
EDIT: And i need a good connector i heard XT60's are good or is there anything better i can buy. I'm fine with soldering
Last edited: