brewsparks
New member
Hi all. I have been flying fixed wing planes for several years, but I am brand new to quads. I bought one of the tiny whoop kits a few days back and I am having a lot of trouble getting it flying. The problem I am having is when I try to take off, the quad starts spinning to the left. If i give it a little right rudder to correct the spin, it flips over. I have tried setting it to Angle mode, but as soon as I arm the drone, the motors spin up and it starts flipping around. I have double checked all of the motor connections and the props to make sure they match the assembly instructions. I have also used Betaflight Configurator to flash the controller with the hex file and loaded the dump file from the product page(i figured out I need to type save from the CLI after the dump file load). I am using the Radiomaster TX16S that I use with my fixed wing models, and I believe I have all of the channels mapped correctly. Happy to post screen shots of anything to help trouble shoot.
Thank You.
Thank You.