1. BradDH

    Servo jitter problems

    I'm just working on finishing up my edge 540 build, and I am using some 9g servos out of my older planes(they worked just fine before). For some reason when I power on everything seems to be fine, but when I move the rudder or elevator around, then return to the original position that i end up...
  2. S

    Jittering Emax MT1806 2280kv Motor

    Hello Flitetest Forum Members, as I am a total NOOB to scratch building, I have come across a problem in my first build(mini guinea). One of my motors starts to jitter every now and then, and then takes about a good 10 seconds to correct itself. I have checked to make sure it is not the esc, the...
  3. D

    Throttle jitter on Turnigy 9X

    Hi guys! I've encountered a problem, and it's getting really annoying. I have a Turnigy 9X V2 transmitter with stock modules, and er9x firmware. After several months of use the throttle stick signal started to jitter, and jump up and down. It's quite random when and where it does this, but it's...