What's new

Latest resources

Sliding Battery Tray Mr NCT
A battery tray for those hard to reach places
0.00 star(s) 0 ratings
Downloads
3
Updated
Modular F-104 70mm EDF Jet telnar1236
6 channel 70 mm F-104 that can be 3D printed using normal PLA and making use of modular connections
0.00 star(s) 0 ratings
Downloads
7
Updated
Pratt & Whitney Wasp(ish) 9 cyl. Radial Mr NCT
4.00 star(s) 1 ratings
Downloads
5
Updated
3D Printable Steerable Nose Gear J
3D Printable Steerable Nose Gear
0.00 star(s) 0 ratings
Downloads
9
Updated
Control Surface Protractor Mr NCT
All your Throw Gauges in one place
5.00 star(s) 1 ratings
Downloads
17
Updated
Gee Bee QED Mr NCT
Plane Gee Bee QED V3
The largest and last Gee Bee
5.00 star(s) 1 ratings
Downloads
16
Updated
Simple Staggerwing Mr NCT
Plane Simple Staggerwing Simple Staggerwing V2.2
Beech Staggerwing in the Simple Style
5.00 star(s) 1 ratings
Downloads
96
Updated
Building Square Mr NCT
Part Building Square 2024-02-03
Square with 2 wide faces
0.00 star(s) 0 ratings
Downloads
10
Updated
New Moon 150% 70mm EDF J
0.00 star(s) 0 ratings
Downloads
17
Updated
Q325 - vTail J
Plane Q325 - vTail 1.1
Quickie 325 V-Tail
0.00 star(s) 0 ratings
Downloads
11
Updated

Latest profile posts

I have an ESC that belongs dys 10A programmable V2, it was preloaded with Simonk firmware. I need to convert it to blheli, but I couldn't find any relavent details about it and how to do that. I tried it to connect to blheli suite via arduino uno, it is detected but not showing any compatible firmware to flash on it. So could u able to provide some details or a link to get hex file to do the firmware update?.

Attachments

  • IMG_20231029_165547.jpg
    IMG_20231029_165547.jpg
    3.3 MB · Views: 0
  • IMG_20231029_165551.jpg
    IMG_20231029_165551.jpg
    3.3 MB · Views: 0
  • IMG_20240315_222022.jpg
    IMG_20240315_222022.jpg
    3.5 MB · Views: 0
  • IMG_20240314_220623.jpg
    IMG_20240314_220623.jpg
    3.3 MB · Views: 0
  • IMG_20240314_223840.jpg
    IMG_20240314_223840.jpg
    2.4 MB · Views: 0
TEAJR66
TEAJR66
I do not know how to do what you are trying.