Build done - But will it fly?

[uncleray]

Greetings! Looking for advice on my finished build before I crash, I mean, test it.
The frame is from my 3D printer (PLA) and the total weight is 810 grams (610 frame + 190 battery)
Motors are 2212-15 930 kv and props are 8045 APC
At 11.1v I calculate approx 2200 grams total thrust.
Does everything sound reasonable?
Thanks!!

 

[PsyBorg]

Make sure you have serious vibration isolation for the FC thats gonna resonate like a dinner bell. I would also secure those esc wires at the bullets better so they don flop around and separate.

Maybe run it up (props OFF for safety) on the bench first and watch the gyros tab or even black box the test to see just how bad vibration is.

 

[uncleray]

Make sure you have serious vibration isolation for the FC thats gonna resonate like a dinner bell. I would also secure those esc wires at the bullets better so they don flop around and separate.

Maybe run it up (props OFF for safety) on the bench first and watch the gyros tab or even black box the test to see just how bad vibration is.

 

[uncleray]

Thank PsyBorg.
Thanks! I did plan to test run w/o props. I'll secure those ESC connections too.

 

["Corpse"]

Looks good, just like @PsyBorg said, isolate the FC from vibration!