My heavily modified ARMIN WING - SLANTED - CAR WRAP - INTEGRATED AILERONS

[rockappalla]

*** UPDATE *** maiden flight with a Turnigy 3542 1450kv and 10*5 prop

Hi there,
here's my version for a fast flying armin wing (which I love)
I built it in about 2 hours, I added 2 XPS shaped wing ends and I used chrome car wrap (bought it on aliexpress for 6.5 Euros - 150 * 50 cm

There's an aluminum spar (hollow 6mm tube) with a 5mm carbon rod insert for joining the 2 halves (I'll add magnets and velcro too)

The ailerons are cut into the wing and I used real hinges

THANKS TO ExperimentalAirlines

 

[ScottyWarpNine]

That looks fast!

 

[rockappalla]

That looks fast!

I hope so! The maiden will be in a few days with a turnigy 2826 2200kv and a 6x4.5 prop on 3s
I have already ordered a Turnigy 3542 1450 kv with some 9x6 and 10x5 props...we'll see

I'll also build a twin boomer using the same wing...i destroyed the last one against a pole
https://www.youtube.com/watch?v=nge35znv5O8 (skip to 1:33)

Total weight is 700 grams

 

[ScottyWarpNine]

Wow, that was an epic crash! What part of Italy are you in? My family is from Roccaraso in the Abruzzo region.

 

[rockappalla]

Wow, that was an epic crash! What part of Italy are you in? My family is from Roccaraso in the Abruzzo region.

I'm from bergamo in Lombardia!

 

[rockappalla]

Updated photos before the crash :lol

 

[rockappalla]

Here's the maiden with various camera angles...