Setup Spektrum AR620 and FT PowerPack A

[nosjoel]

Hi everyone!

I bought a FT PowerPack A and a Spektrum AR620 DX6e. I am having problems making the motor to start spinning. What I mean by that is that servos are moving as expected, but when I move the throttle stick(left stick) upwards the motor is not spinning. My current configuration is set to Acro in the transmitter. At the back of the transmitter it is set Mode 2/4. Any help will be appreciated.
Thanks!

 

[Bricks]

Have you calibrated the ESC?

 

[randyrls]

The ESC should give a series of beeps and then a pause, and two beeps.

 

[Egil]

Hi! Try these:

1. Throttle Calibration: Make sure the throttle is calibrated.
2. ESC Connection: Check if the ESC is hooked up right.
3. Throttle Trim: Set the throttle trim to neutral.
4. Battery: Ensure the battery is charged and connected.