Hopeso. I think practicing taking of and then landing in only 1 circuit was a good idea. ive no cut my landing approach circuit a fair bit.
Ive used filiament tape on the top to help reinforce the hotglue join so as if it doe have a hard belly landing it shouldnt go. 1 strip ontop on the back and 1 strip on the front, both under tensions.Propabbnly not very aerodynamic but should provide a decent amount of strength incase of any oopsies.
Might just have to put electronics in 1 of the spares to see how that flies as it is much lighter.
Im being very carefull with speed at the moment as thats when bad things happen, although im not going slow, the only time ive opened up the throttle full was when climping
Ive used filiament tape on the top to help reinforce the hotglue join so as if it doe have a hard belly landing it shouldnt go. 1 strip ontop on the back and 1 strip on the front, both under tensions.Propabbnly not very aerodynamic but should provide a decent amount of strength incase of any oopsies.
Might just have to put electronics in 1 of the spares to see how that flies as it is much lighter.
Im being very carefull with speed at the moment as thats when bad things happen, although im not going slow, the only time ive opened up the throttle full was when climping