Parting with the primary components of a Flite Test Mini Twin Power Pack (A) as well as some extras.
All of this gear was used responsibly and is in great physical and operational condition. Some is new.
2 x Emax MT1806 2280kv motors
2 x BL Heli 12A ESCs - JST
4 x Emax ES9051 5g servos with associated hardware
2 x HQ 6x3 Props - 1 x CW, 1 x CCW. New, never used.
1 x JST Y-Lead (for ESCs)
1 x Servo Y-Lead
4 x Dubro EZ-Links and some pushrods - last used with servos, all is a good fit. Great for small builds.
1 x 6ch Orange RX - DSM2. Currently out of case, case included.
3 x 1” foam wheels
2 x ~2” Genuine Trexler Latex Pneumatic Baloon Wheels.
$45 shipped in US. PP only.
Note about Trexler Balloon Wheels: If you’ve never heard of these, they totally rock. They give you’re model such a fun and spirited landing - bouncing joyfully like a tundra plane. Very important to read about them, and the instructions here http://www.trexlerballoonwheel.com.
I believe these are the #3 wheels, inflating to just under 2”. Check them out here, and pay attention to the DOs and DONT’S for Treadler wheels http://www.stevensaero.com/Trexler-03-Pneumatic-Balloon-Wheels-Pair-TRX03.html
The ad is posted over on RCG. Click the link for pictures.
Priority for FliteTest peeps for 24hours.
All of this gear was used responsibly and is in great physical and operational condition. Some is new.
2 x Emax MT1806 2280kv motors
2 x BL Heli 12A ESCs - JST
4 x Emax ES9051 5g servos with associated hardware
2 x HQ 6x3 Props - 1 x CW, 1 x CCW. New, never used.
1 x JST Y-Lead (for ESCs)
1 x Servo Y-Lead
4 x Dubro EZ-Links and some pushrods - last used with servos, all is a good fit. Great for small builds.
1 x 6ch Orange RX - DSM2. Currently out of case, case included.
3 x 1” foam wheels
2 x ~2” Genuine Trexler Latex Pneumatic Baloon Wheels.
$45 shipped in US. PP only.
Note about Trexler Balloon Wheels: If you’ve never heard of these, they totally rock. They give you’re model such a fun and spirited landing - bouncing joyfully like a tundra plane. Very important to read about them, and the instructions here http://www.trexlerballoonwheel.com.
I believe these are the #3 wheels, inflating to just under 2”. Check them out here, and pay attention to the DOs and DONT’S for Treadler wheels http://www.stevensaero.com/Trexler-03-Pneumatic-Balloon-Wheels-Pair-TRX03.html
The ad is posted over on RCG. Click the link for pictures.
Priority for FliteTest peeps for 24hours.