1. R

    hot glue connectors in receiver

    my connector's become loose in my receiver how can I glue them or tighten them?:confused:
  2. chronix

    Question about pushrods

    So when you buy a powerpack they throw some ez connectors in there and I have no idea whether they should go on the servo arm or control horn. Also it appears they are made to be held in place with a nut which I didn't see. So help me out please folks, HTH do I attach these little jokers?
  3. S

    Deans, EC3 or XT60 ???

    Hello, I am new to the hobby and am getting a few planes in the air and would like to get some input on what experienced flyers are using for electrical connections. I have a small biplane that uses JST connectors as it only draws about 5-7amps running on a 3s 450MaH battery pack. The...
  4. Fuzzy Whumpkin

    Battery Connector Question

    Hey all, I found these LiPos on AliExpress pretty cheap, but i'm not totally sure about them... mainly what the connectors are coming off the battery. here are some pics: it's a 2200 mAh 15c 3-cell. I'm pretty sure about the red being a JST plug and the white being the balance plug, but...
  5. G

    Dean's connectors

    An awful lot of folks use Dean's connectors and find them very difficult to unplug. Buy a "small" reversible pair of snap ring pliers. Drill a small hole in each half of the connector and you will say to yourself, "Why didn't I think of this before". If you drill all the way through, use...