escs

Anyone can help me? I dont know what is happening with my drone, but sometimes, in mid-flight one of my motors kinda gets stuck and the drone flips over and fall (video below). I didnt had any major crash, but i suspect it can be one of the ESCS. Also i have recently flashed Betafligt on the...

It's an Illuminati FC with built-in OSD and flashed with the latest Naze32 CleanFlight. On quadcopter everything else works fine in CleanFlight and it flies great. When I go to the motors page in CleanFlight I can click the button that I have removed the props, input via the GUI and my radio...

Hi Guys, I'm having a problem with my motors where they don't spin up at the same time and don't spin in sync either. I'm have the RTF JJRC JJPRO P200 Quad and it has EMAX 20A Lighning ESCs and a EMAX Skyline 32 fc. I flashed the ESCs and FC with the most recent firmware and calibrated the...

Hey Flite Test fans, I'm looking for opinions on the many choices of power packs and components for the Tiny Trainer. I would just order from Altitude Hobbies but they have been out of stock for a while...these kits are super popular apparently:applause:. I've followed most of the links...

Hey guys, Because the kiss 30A ESCs are a while a way i am looking to get either some Afro ESC 30Amp which run SimonK or some Rotorgeeks 30A BLHeli ESC, and i am curious as to which firmware is better? Also does anyone know any other good quality ESCs which have some of the features of Kiss...

Quick question about best practices for wiring up ESCs. I have six ESCs that I'm wiring up for a Y-6 copter. I've decided to go with three pairs of ESCs on two layers. One pair for each arm: I'm not sure what the best way to set up the harness for this set up would be. I Here's a two-layer...

I have Turnigy Multistar esc's. 2-30amp ones and 1-15amp one. a kk2 board. batbone frame I kept flipping on what I wanted to be my maiden flight. I can't even get it to hover. I Hexa checked that props and motor rotation were correct. I thought I calibrated the esc's because i heard the beeping...

I built the wooden H Quad frame, looks great, now I need to add all the parts. Here's the shopping list I'm working on.... 1x #381000134/27109 MultiWii Lite V1.0 Flight Controller w/FTDI = $26.29 4x #TR_P18A/4312 TURNIGY Plush 18amp Speed Controller = $44.04 2x #AM1003A/67 4mm Gold Connectors...