• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.


  1. V

    FliteTest Master Series P47 Razorback

    Hi Guys, I just completed by Maiden flight of the FliteTest Master Series P47 Razorback. My 1st master series build and quite happy with the end result. The specs of the plane are: Motor: Flite test Radia 2212B 1050kV motor with a 10 x 5 prop, 40 amp esc, 3s 3200 mah LiPo. Used the MakerFoam...
  2. ZOHIO

    Mock Radial For Master Series P47

    Hey guys, i finally finished and am releasing my design for a mock radial engine. The engine files can be found on Thingiverse here: https://www.thingiverse.com/thing:4460787 . The design allows for a adequate amount of room for the flite test radial engine as well as it also fitting snugly into...
  3. H

    My 1/12 scale P-47 thunderbolt

    I was prompted to post my own work (by someone on youtube!)that has been sitting around for 2 or 3 years at this point. it's, as the title implies, a 1/12 scale p-47 thunderbolt made from balsa wood. this was very much a learning experience for me because i have never done any kind of serious...