Amiromaan says hi from the Netherlands

Amiromaan

New member
Hi everyone,

I'm new here and relatively new to the hobby. A couple of months ago I bought my first plane (Hype Funtastic) and learnt to fly it all by myself (took a while and some crashes :D). I found Flite Test, Hobbyking and sheets of depron at a nearby RC store. So I've now build: Flyer, Delta, Versa wing, Simple Storch and the Racer. Also the FT3D but it broke in 2 at the maiden, so I still have to fix that. I love to start and land the Storch, although it doesn't fly too good. The Racer flies really well, hadn't expected such performance. Now I'm looking further for something new, think I will try one of Nerdnics speedy planes. :)
 

ViperTech

Member
Welcome to you Amiromaan from the state of Pennsylvania in the USA.
We love pictures and videos if you have them.
Lots of help on here if you need any. Congrats on your success.
 

Amiromaan

New member
Thanks guys!
Here are some pictures.
I've had some issues with the landing gear of the Storch. It took a while to not tear off the depron. Since my road is quite bumpy I increased the wheel size to soda can size (literally :p). Then I got so enthusiastic by the driving capabilities that I crashed my tail while driving around.
For the Racer I adjusted the wing details to a closed wing and the bottom of the fuselage is in one piece together with the wing. I used 6mm depron for the bottom and 3mm for the top of the wings. In the process I forgot about the servos, so now they stick out to far and are hit while landing. Therefore I made some more landing gear. Taking off from the ground is quite difficult without that rudder though, it's a matter of luck going straight and not run into the high grass. Now my wheels are falling apart. :black_eyed:
The maiden of the FT 3D didn't really work out as you can see. I think the ailerons were set too low, causing the plane to instantly go nose down, but I'm not sure. Also the throws were too high. I used ducked tape in the field to make some more attempts, but my control horns fell off.

IMG_20151108_1447232.jpg IMG_20151223_114733.jpg IMG_20151223_114756.jpg IMG_20160103_142928.jpg IMG_20160103_142947.jpg IMG_20160117_154103.jpg IMG_20160118_232859.jpg IMG_20160118_232956.jpg IMG_20160118_233118.jpg IMG_20160123_133750.jpg IMG_20160124_174631.jpg IMG_20160124_174801.jpg