If you solder 3.5mm bullet connectors on the A pack motor, then yes. That's actually what I do for all my motors.@The Hangar @BradDH Can I just grab power pack B and then the power pack a motor seperate and just swap them out?? also the batteries on amazon aren't prime anymore so will these work
https://store.flitetest.com/tattu-2s-lipo-battery-45c-7.4v-800mah-tat-45c-800-2s1p-jst/p675941
and
https://store.flitetest.com/tattu-3...-1300mah-jstxh-tat-45c-1300-3s1p-xt60/p450620
and with this charger
https://store.flitetest.com/ecopowe...e-battery-charger-23s-2a-25w-ecp-1004/p698674