Lanyu Corsair Brushless Conversion

[cvdmaverick]

Hello,
When I first started flying I bought this corsair thinking I could fly it. Obviously I couldn't. I broke a lot of things, I bent the motor mount, bent the motor shaft, and cracked the cowling in several places. It ran off of a brushed motor with a gearbox and a 9.6v NiMh battery with a 8x6 prop. The wingspan is roughly 33" I believe. I would like to put a lipo battery with a brushless motor into it. I have taken out the old brushed electronics hoping to put a new brushless motor and ESC into it and fly it again. Any suggestions for a motor, prop, and battery? I don't think there is a lot of room for a battery in the hatch. I also have a motor mount that fits on the motor mount stick, maybe I can use that? Any help is appreciated. Thanks

 

[Spastickitten]

Do you know the weight of the battery or the correct cg? I have a motor in mind, but I don't know. I would wait until someone else thinks it's a good idea for you to use this. I usually go to spec, so I used this for my ft22

Never mind I thought you said 8x4

Here's a new link

http://www.headsuphobby.com/Emax-BL2215-20-1200kv-Outrunner-Brushless-Motor-D-662.htm

I think it will go pretty fast though.

 

[cvdmaverick]

Thanks for the input!