Looking for free lasercut balsa plans

[shayan]

Hi
I am looking for free laser cut and assembly plans of an electric balsa and standard covering(if it be trainer it will be better) plane.
But I didn't find any on the internet .
Is there any websites that offer this kind of plans for free?
Thank you.

 

[pccharlie]

http://aerofred.com/categories.php?cat_id=5 hey i found this if this helps

 

[shayan]

thanks

 

[N4RF]

Free and Laser cut may not come together. I've been looking for my own winter project and there are a few out there that sell laser cut kits but none that I've come across that provide them free.

Hobby express does a trainer in a kit but it runs about $100 with shipping

http://www.hobbyexpress.com/64_balsa_t_40_kit_1044093_prd1.htm

 

[moebeast]

http://outerzone.co.uk/ has over 7,000 plans.

 

[Joker 53150]

Custer had a plan.

 

[ViperTech]

Free sites already listed, Aerofred and Outerzone. If you want an inexpensive balsa laser cut Trainer plane kit, I can recommend the Cloud Dancer from Hobby King. I built one and it was my first balsa experience it was a little tough but well worth it. Here is a link to it.
http://www.hobbyking.com/hobbyking/...ut_Airplane_Kit_1300mm_KIT_AR_Warehouse_.html
I learned a lot on the build and really enjoy flying the plane. I modified mine after the first few flights as the nose gear mounting is weak so I turned it into a tail dragger. I had it out today as a matter of fact!
Here is a picture of it before the motor was installed and it was made a tail dragger. I have video of it somewhere I post that later!