unrauv
Active member
PDFs Removed for update
/******************** Please Note ************************************************** *****/
These designs are not hard but they assume a good knowledge of foam board aircraft and building techniques. If you are a beginner watch the youtube's and do a couple of FT designs first to get some experience.
/************************************************** ************************************/
Wingspan 1019mm or 40"
If I have forgotten anything please just leave a reply.
Red = Cut
Light Blue = Crease
Blue Long Dash = 50% Cut
This is what I have used:
28x26 1200Kv with 30Amp Speed Controller
2200 3S Lipo or 2000 4S Lipo.
9x6 prop.
2" Dubro Nose Spinner.
Last edited:
