Hello, i've recently bought SP F3 FC and connected it to my turnigy 9x receiver. When quad is connected to Cleanflight it only reads two channels: AUX 1 and AUX 2. They response only when i move throttle and yaw. I tested receiver with 9g servo and it works fine. I've also tried with different receiver using SBUS and it responds the same way. I tried remapping and downgrading software but nothing changed. Maybe somebody had such issue and is able to help, i would be grateful.
Problem with reading signals from reciver, Cleanflight.
- Thread starter juzeg
- Start date
Similar threads
