Will it work?

Bo123

Elite member
What size and type of plane are you building? Its hard to judge which electronics you should use. And also what material?
 

Magne

New member
I am trying to build the migthy mini arrow from flite test. It is made out of foam. I just want to know if these components would work together without getting wrecked in the process.
 

NickRehm

Member
6x4 prop might be too big for that motor, try 6x3 or 5x4x3. ESC looks fine. Go for the 1000mah battery.

You will probably need to buy some common connectors...not sure if those components come pre-soldered and if so, with compatible connectors. Order XT-30s or XT-60s for the ESC and battery, 2mm bullet connectors for the motor and ESC. And grab a soldering iron if you don't have one already. Best of luck
 

skymaster

Elite member
I like the setup and the motor and prop are good that's how i have been flying mine. that motor was the F pack back then. on the 1000 mAh try to get one that has a 30c or higher. that is going to be a speed demon. good luck and have fun.