• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

rtfquads

  1. L

    Are the RTFQ X2204 Advanced airbot titan clones?

    They look the same to me http://www.readytoflyquads.com/rtf-mini-motor-x2204-2300kv http://www.multirotorsuperstore.com/motors/airbot-titan-2204-2300kv-brushless-motor.html Also the single piece of thrust data RTFQuads gives "490g of thrust with HQ 5x4 at 10.5A / 130W" seems to match what the...
  2. C

    HELP Please?

    I just got a new RTF gimbal form RTF quads, but it doesn't seem to work. When I plug my 3s battery into it a solid blue light, and red light come on, and so does a flashing green one. This is my first gimbal so Im kinda lost. Any ideas on why it isn't working? Thanks!
  3. C

    RTF gimbal not working

    RTF gimbal not working? HELP!? Hello, I just received RTF quads RTF gimbal that I bought. When I plug in my 3s battery nothing happens, three lights come on a solid blue, a solid red, and then a little flashing green. This is my first gimbal so I'm kinda lost here. Any idea on why it isn't...
  4. ResidualBacon

    First flight... flipped over. Help?

    I've got an Electrohub kit with the RTFQuads pack. I flipped over immediately on my first flight. I verified that all the props are spinning in the correct direction and that the inputs to the board are connected to the right inputs on the receiver. What can I check next?
  5. ResidualBacon

    First Electrohub build - ESC question

    I'm building my first Electrohub kit (with Ready To Fly Quad electronics pack) after building a few FT airplanes. I soldered the motor to the ESC as shown in the video, but I don't have a servo tester to try out the motors and see which way they spin. Instead I just hooked up a receiver that is...
  6. Headbison

    ElectroHub and RTFQ electronics HELP

    A newbie to the quad building have 5 RTF's 350QX down to the micros. Problem is I ordered this electronics package because it was suppose to be plug and play, and later found out it's that easy... After watching Crash's video Flip 1.5 for dummies and trying to get my computer(iMac) and the FCB...