mrstamp80
New member
So i am cleaning up a bit, and have 4 emax cf2822 I can't remember if they are 800 kv or 1000kv but all 4 are the same. Here is the run down, all 4 have very little time on them. The all work, however the 2 on the left are in perfect working order the 3rd in the picture has a bit of play in the housing (was in a crash). The 4th motor was in a crash and the prop saver is stuck on the shaft, most likely the shaft is bent. So these 2 motors could be made to 1 good one. I know it sounds a little bad, but everyone has stuff just laying around
********************* SOLD *********************************
********************* SOLD *********************************
Last edited:
