mjcp
Senior Member
In an attempt to "Give back" or "Pay it forward", please fond attached my OpenTX settings for a Flyfly DG-808s 4m glider.
This is created with OpenTX 2.0.17. My radio is a FrSky X9D+
You will also need the "Amber" voice/sound files HERE
The DG-808s is a 4 servo wing with Rudder/Elevator. The setup includes:
CROW braking on Throttle (Flaps down, Ailerons Up) in all flight modes (throttle Up = no braking)
4 Flight modes - Launch, Cruise, Thermal, Speed
Flap control on Launch mode
Reflex on the flaps on Speed mode
Camber on both Ailerons and Flaps on Thermal mode
Flaps slaved to Ailerons on Cruise, Thermal and Speed modes
Spoken flight modes on switch change
Selectable Spoken altitude/Vario tones/Off (Logging = ON if not OFF)
Labelled mix names.
The setup uses a custom curve CV1 on the crow system and the built in differential for the Ailerons etc.
Switches used:
SA - Down = launch mode and overrides ALL other flight modes. (Up and middle have no effect)
SB - UP = Cruise Mode
- MIDDLE = Thermal Mode
- DOWN = Speed Mode
SD - UP = Silent & Logging off
- MIDDLE = Vario & Logging ON (1 second intervals)
- DOWN = Spoken Altitude (10 Second intervals)
Power on checks ensure the TX is in Launch mode with Cruise mode as the next selected mode. (i.e. SA=DOWN and SB=UP)
You may need to adjust your weights to get correct throws on your TX/Servos etc. Hopefully the labels will make it straight forward to know which is which.
Channel assignments are:
Ch1 = Left Aileron
Ch2 = Left Flap
Ch3 = Right Aileron
Ch4 = Right Flap
Ch5 = Elevator
Ch6 = Rudder
Enjoy!
mjcp
This is created with OpenTX 2.0.17. My radio is a FrSky X9D+
You will also need the "Amber" voice/sound files HERE
The DG-808s is a 4 servo wing with Rudder/Elevator. The setup includes:
CROW braking on Throttle (Flaps down, Ailerons Up) in all flight modes (throttle Up = no braking)
4 Flight modes - Launch, Cruise, Thermal, Speed
Flap control on Launch mode
Reflex on the flaps on Speed mode
Camber on both Ailerons and Flaps on Thermal mode
Flaps slaved to Ailerons on Cruise, Thermal and Speed modes
Spoken flight modes on switch change
Selectable Spoken altitude/Vario tones/Off (Logging = ON if not OFF)
Labelled mix names.
The setup uses a custom curve CV1 on the crow system and the built in differential for the Ailerons etc.
Switches used:
SA - Down = launch mode and overrides ALL other flight modes. (Up and middle have no effect)
SB - UP = Cruise Mode
- MIDDLE = Thermal Mode
- DOWN = Speed Mode
SD - UP = Silent & Logging off
- MIDDLE = Vario & Logging ON (1 second intervals)
- DOWN = Spoken Altitude (10 Second intervals)
Power on checks ensure the TX is in Launch mode with Cruise mode as the next selected mode. (i.e. SA=DOWN and SB=UP)
You may need to adjust your weights to get correct throws on your TX/Servos etc. Hopefully the labels will make it straight forward to know which is which.
Channel assignments are:
Ch1 = Left Aileron
Ch2 = Left Flap
Ch3 = Right Aileron
Ch4 = Right Flap
Ch5 = Elevator
Ch6 = Rudder
Enjoy!
mjcp
Last edited:
