A-51 Stallion 2024-06-21

[Brian B]

Brian B submitted a new resource:

A-51 Stallion - A fictional kitbash of two FT Master Series P-51s

Photo documentation with inch grid reference for reproduction. No digital plans, a design-as-I-go build inspired by a DeviantArt photoshop and fictional backstory of a missing link between the Mustang and the Bronco. More like a marriage between a P-38 and a P-51 to me. Builder should have at least some experience with Master Series Building techniques. Standard dyhedral angles halved, but there are two joints, so result is same. Clipped each wing tip 4", new 18" wide center wing section...

Read more about this resource...

 

[FlyerInStyle]

Do you want me to make plans for this? I dont think it would be too hard

 

[Brian B]

You're gonna build one? I'd be glad to help by filling in the blanks in my rather rough documentation. Much will only make sense when you actually are building a P-51 MS kit.

Sure you can draw up whatever you want. But I'd recommend building one as proof the plans work, and also include how to modify the FliteTest kit.

I don't need credit, the design came from this user Bispro, not me.

North American A-51 ''Stallion'' by Bispro on DeviantArt

www.deviantart.com

 

[FlyerInStyle]

You're gonna build one? I'd be glad to help by filling in the blanks in my rather rough documentation. Much will only make sense when you actually are building a P-51 MS kit.

Sure you can draw up whatever you want. But I'd recommend building one as proof the plans work, and also include how to modify the FliteTest kit.

I don't need credit, the design came from this user Bispro, not me.

North American A-51 ''Stallion'' by Bispro on DeviantArt

www.deviantart.com

I plan on drawing it up when I get to building it, although Ill cut my own p51, not the kit, as I might watnto build it with a a pack twin at a smaller scale. Well see when I catch up on my current projects