Binding T16 with Turnigy 5X receiver

[cdfigueredo]

Some days ago i received the Jumper T16 V2 Pro and I was trying to bind it with the receivers of my old Turnigy 5X radio and I can't seem to find a correct way to do it. Does anyone have any ideas?
I tried Futaba protocol, kyosho and also FlySky without any success...

This is my old radio https://hobbyking.com/es_es/turnigy-...-receiver.html

Thanks in advance

 

[cdfigueredo]

I also updated both OpenTx to last version and internal module firmware!

 

[Bricks]

Here is a link looks like your Turnigy receiver uses FlySky protocol google search works wonders, let us know if this does work.

https://timtuxworth.me/2021/06/05/jumpert-liteturnigy/

 

[cdfigueredo]

Here is a link looks like your Turnigy receiver uses FlySky protocol google search works wonders, let us know if this does work.

https://timtuxworth.me/2021/06/05/jumpert-liteturnigy/

that was my first try and it did not work!
Anyway thanks for sharing. i will try it again due to the first time i did it was with the outdated OpenTx and Firmaware versions

 

[Bricks]

that was my first try and it did not work!
Anyway thanks for sharing. i will try it again due to the first time i did it was with the outdated OpenTx and Firmaware versions

My RadioMater TX16S needed a multi module update before it would work with some protocols after updating to the latest transmitter firmware..

 

[cdfigueredo]

My RadioMater TX16S needed a multi module update before it would work with some protocols after updating to the latest transmitter firmware..

i updated it in thtat order, first transmitter OpenTX version and then multi module firmware. It simple does not work with any of the options.