• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Chuck Glider Conversion

#2
We started a project like this once, we determined it shouldn't be too hard. You just need to hollow out a place for the electronics and hack together a rudder/elevator. We were going to use foamboard with tape hinges. You should give it a try, just make sure to double check the CG.
 

Fluburtur

Cardboard Boy
#4
I was thinking myself about trying to convert some playmobil or barbie airplane to rc, they have an undercambered airfoil so that could work.