Technorich
Junior Member
Posted below is a link to a project that I created, it is a 1/4 scale EDF GoKart. I tried flying but I am a little bit visually impaired. It was not a pretty site so I turned my RC interest to the land, but kept the interest in flight. The GoKart is based on the Turnigy 1/4 scale GoKart chassis from HobbyKing. It has a 64mm EDF using a 30a ESC to control the fan unit. I use a 6ch 2.4ghz radio. I hope that you enjoy seeing my project
http://youtu.be/lHmbozJY1nY
http://youtu.be/lHmbozJY1nY
