FT LongEZ 1.0

[flitetest]

flitetest submitted a new resource:

FT LongEZ - FT LongEZ Free Plans

FT LongEZ
Designed By: Alex Zvada & Josh Bixler

The Flite Test LongEZ is a great "bank and yank" semi scale DIY electric airplane kit. Simplicity was the theme of this design and our hopes are that it can be built and flying in no time! One motor, an ESC, and two servos are all you need to get the LongEZ in the air. Powered with the power pack A it can run off of a 2s...

Read more about this resource...

 

[Jorge Pi]

The kit description in the store and an email received today say that the size of this plane is 760mm, but the size on the plans is different.

 

[CarolineTyler]

In the plans there's no indication of any paper removals, wouldn't that be needed to get the top and bottom fuselage covers to bend into the depicted graceful curves?

 

[PoorManRC]

In the plans there's no indication of any paper removals, wouldn't that be needed to get the top and bottom fuselage covers to bend into the depicted graceful curves?

They did remove it in the build video...

 

[Battery800]

@fliteadmin @flitetest I don’t think the score cut across the lower fuse should be there? Isn’t that just for SBK ease of shipping?

 

[Mr NCT]

@fliteadmin @flitetest I don’t think the score cut across the lower fuse should be there? Isn’t that just for SBK ease of shipping?

The red dashed line between the B fold logo and the green lines for the hatch doubler does not get scored. Don't know why it's there.

 

[Battery800]

The red dashed line between the B fold logo and the green lines for the hatch doubler does not get scored. Don't know why it's there.

i think it’s for shipping when the split the foam in half for a smaller box

 

[Battery800]

i think it’s for shipping when the split the foam in half for a smaller box

but I don’t think it’s supposed to be there