Good Electronics combo?

[Fbords]

I've been tinkering with swappables since the Baby Blender v1 and since then the recommended electronics have changed a bit. I'm wondering if these will still be a good combo for my baby blender, ft3d, and ft duster, since I ordered them a while ago.

• Turnigy Plush 25A ESC
• Turnigy 1300mAh 4S 20C lipo
• NTM Prop Drive 28-26A 1200kv/250w motor

 

[Jaxx]

Yes. That combo should work fine in all three planes.

 

[NewZee]

I've been tinkering with swappables since the Baby Blender v1 and since then the recommended electronics have changed a bit. I'm wondering if these will still be a good combo for my baby blender, ft3d, and ft duster, since I ordered them a while ago.

• Turnigy Plush 25A ESC
• Turnigy 1300mAh 4S 20C lipo
• NTM Prop Drive 28-26A 1200kv/250w motor

I am using the exact same components,(except I use 1300mAh 3s) and fly them in my power pods used in FT Spitfire, Old Fogey, and J3 Cub (my design). I have bought several sets now, and so far have not had any problems, I fly with props of various sizes ( 7X5, 8X6,9X4.7, 10X4.7 sf) depending on what plane it's going in. make sure you buy the adapter kit for the motor ( mount, propshaft, and bullet nose) to facilitate mounting,