Hawker Hurricane - PDFs and Decals

[unrauv]

Hawker Hurricane - PDFs




54x35 Roll Plan PDF : View attachment HawkerHurricane-54x35.pdf
8x10 PDF Tiles : View attachment HawkerHurricanePDF.zip

8x10 Decal : View attachment HawkerHurricane-Decal1.pdf
8x10 Decal : View attachment HawkerHurricane-Decal2.pdf

Well hear you guys go, I have build this model so all fixes have been made. Have fun build away.

/******************** Please Note ************************************************** *****/
These designs are not hard but they assume a good knowledge of foam board aircraft and building techniques. If you are a beginner watch the youtube's and do a couple of FT designs first to get some experience.
/************************************************** ************************************/

Wingspan 1019mm or 40"

If I have forgotten anything please just leave a reply.

Red = Cut
Light Green = Crease
Blue Long Dash = 50% Cut

This is what I have used:
28x26 1200Kv with 30Amp Speed Controller
2200 3S Lipo or 2000 4S Lipo.
9x6 prop.
2" Dubro Nose Spinner.

Donate :
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=SAXME7RUBLHF8&lc=CA&currency_code=CAD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted

 

[viggen]

where is your CG location.thanks

 

[unrauv]

CG

Front spar, this plane is very similar in size to my P-40. I put the 2200 3S even with the end of the motor pod and the CG is a little forward of the front spar. But it will change depending on the way you build the model, ie too much hot glue.