• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Help!!

chipnkim

Junior Member
#1
Ok I bought three piper cubs 2 are exeed piper j3 cubs on 1 of then the Elevator wont work it seems to be the channel 2 on the transmitter. it will be all one way and will change when i reverse the switch but nothing from the stick.the other is fine. now my dynam piper j3 cub my ailerons are doing nothing. and of course the instructions leave alot to be desired.
 

lobstermash

Propaganda machine
Mentor
#2
Try putting the plug in the other way... I recently hooked up a plane and thought the elevators were dead. The plug was just set up different to how they normally are (exposed bits facing the opposite way!) and after I turned it around was perfect.

Also, you might have a dodgy servo. Try plugging it in to other channels and see if there's an issue with the servo.