How to mix aileron and elevator channels

[Sir Tomislav]

Hi,

I am building the Mighty Mini Arrow by Flite Test. I am using Transmitter and Reciever of my (broken) Reely Phoenix.
Since the Mini Arrow is a Wing, it has only Elevator and Ailerons to control. The Problem is, that the plane the Transmitter was used on before had seperate Elevator and Ailerons. So the channels were also seperate. The Transmitter has no button for mixing channels, it has only a reversing button for each channel.
It is possible to mix the two channels in another way? Like rewireing something inside the Transmitter?
Sorry for the bad Englisch, its not my mother tongue.

Tom

 

[JimCR120]

Well Sir,
The short answer, in theory, is yes, BUT difficult enough I wouldn't even bother. I would suggest getting one of the many decent radios out there that can easily switch to a Delta Mix as it is often called.

No need to apologize for your English. You communicate very well. Where are you from Sir and would you tell us a bit more about yourself.

Welcome to the forum.
—Jim

 

[Andrew]

The easiest way to do elevons mixing for your radio system is to use a V-tail mixer like this plugged into your receiver.

https://hobbyking.com/en_us/turnigy-v-tail-mixer-ultra-small.html