Micro Delta need help with dimensions

[WidgetAU]

Hi All

came across this on hobby king 2.4Ghz SuperMicro Systems

and this on youtuble Micro (DELTA WING) Scratch build

Now I have some 3mm depron, 8mm brushed motors (quad with fried board) and FPV camera/VTX also from the quad

Despite best effort I am unable to find a plan for this delta but I was thinking a KFm2 wing at about 300mm span 110mm at the root and 70mm at the tip. Swept 115mm at the tip with 25mm x 100mm elevons.

Cheers

 

[Userofmuchtape&glue]

Try this. Its my design "Foxbat", my ones are 600mm WS but it should scale fine and its great at low speeds. scale as required!

View attachment Foxbat.pdf

The fin goes behind the motor slot, swept rear wards.

 

[WidgetAU]

For those that visualize better with a drawing

 

[Michael9865]

Try this. Its my design "Foxbat", my ones are 600mm WS but it should scale fine and its great at low speeds. scale as required!

View attachment 96523

The fin goes behind the motor slot, swept rear wards.

Any pictures of your Foxbat?

 

[Userofmuchtape&glue]

Yeah Michael, I will grab some today.