BlockerAviation
Legendary member
Hey guys, Pilot Blocker Here, I've been having power system issues with my new home built fpv airplane. The motor is an emax 2204 2300kv with a 20a race quad esc and a 3s 800 powering it. It seems to have a timing issue at full throttle and on start up. I've been switching motors all day to no effect. When I increase the throttle slowly it stutters until I give it a burst of power then, it starts producing thrust. Additionally when at or near full throttle the motor loses power and starts stuttering again. I measured the amperage and it's only pulling 10a so it's under the amp limit. NEED HELP!