Props for mini and swappable series

[Buzzmonster]

I am looking for props for the swappable and mini series, I need 6x3 or 6x4.5. I tried finding some on hobby king and failed, I only need them in standard rotation. What am I doing wrong here ? Where do most people source props ? my LHS doesn't stock them

 

[510thousandths]

I've been pretty happy with Ebay and Amazon for gws style props. They typicaly ship from china or Hong Kong so it may take a couple weeks. Going through the searches at either will probably find a stateside vendor, though.

 

[510thousandths]

Some 6x3s
http://www.ebay.com/itm/Gemfan-Blac...88?pt=LH_DefaultDomain_0&hash=item3f4b687fb8

 

[Buzzmonster]

I guess I could always switch the direction of the motor to use CCW props and get a pack from hobby king

 

[510thousandths]

unless you have your thrust angle offset....then you would need another pod with an opposite correction to the thrust angle. If you mptpr is square to the airframe, you'll just need to adjust your trims, most likely. AND...this is important...If your prop is held on by a nut with a right hand thread, loctite the crap out of it or the prop will just spin off!

 

[Buzzmonster]

ah why is life never simple ? Thanks of course all good points. I will hunt about to find what I need on eBay. Thanks for all the help